How To Clean The Filter
The cleaning methods of the filter mainly include the following:
Manual cleaning: Applicable to automobile air filters. Remove the filter element and use compressed air to blow from the inside to the outside to remove dust, or use a vacuum cleaner or soft brush to gently remove dust from the shell. For water purifier filter elements, manual cleaning is the simplest and most intuitive method. Just take the filter element out of the water purifier and gently rinse the surface dirt with running tap water. If necessary, use a soft brush dipped in mild detergent to gently scrub the outer layer. After cleaning, dry it and install it.
Immersion cleaning: Applicable to filter elements such as PP cotton and activated carbon. Put the filter element in a clean container, add clean water and an appropriate amount of detergent, soak it for half an hour to one hour, and stir the solution appropriately during this period to promote the cleaning effect. After cleaning, rinse it with clean water and dry it.
High-pressure water gun cleaning: Applicable to high-precision filter elements such as ultrafiltration membranes and RO membranes. Fix the filter element in front of the water gun nozzle and use high-pressure water to wash away the internal dirt and impurities. Pay attention to maintaining the appropriate spray distance and angle to avoid damaging the filter element structure.
Ultrasonic cleaning: Suitable for all types of filter elements, especially internal dirt that is difficult to clean. Put the filter element into the ultrasonic cleaning machine, add an appropriate amount of cleaning agent, turn on the ultrasonic function, and the dirt and bacteria will be shaken off and separated under the action of vibration. The cleaning time depends on the degree of contamination, generally not more than half an hour.






